Flatmaster
PDF Plan for Flatmaster All-Fences
PDF Plan for Flatmaster All-Fences
PDF Plan for Flatmaster
PDF Plan for Flatmaster.
Do I need a dust collector for my Drum Sander?
The V-Drum Sander is made with a special anti-static polycarbonate tubing. This, in turn means that when you are sanding, most of the dust you are creating just falls into the box below. The dust collector in some way, shape or form. What most people ...
What motor size do I need and what speed should I be running the drum at? Or What is the Advantage of a Balanced Drive Sytem?
For the 18" drum, we recommend that you have a 1/4 HP motor. As far as speed is concerned, this is going to depend on what kind of drive system you have. If you are using Linkbelt and Balanced pulleys, your motor will be able to run faster and ...
Flatmaster or Drum Sander - The paper keeps flying off the drum...what should I do?
In order to prevent this from happening, we recommend that you cut the paper's pointed tips off square. (If you see us at a show, this is what we do, although once in a while the paper still comes off. We call this our disappearing paper trick!) If ...
Flatmaster or Drum Sander - How do I change the depth of cut?
When you want to change the depth of cut of your sander, it's as simple as changing the grit. If you want to cut more, put on a coarser grit. If you want to cut less, put on a finer grit. The grits available range from 60-1500g.
V-Drum Sander or Flatmaster - How do I set up my drum?
Centrifugal force is the key element allowing the "V"-Drum Sander to work properly. With your FINEST grit of sandpaper on the drum and your drum turned OFF, take a flat edged board and slide it over the drum. The drum should be below the table. This ...